§ 183.560. Hose clamps: Installation.
94 words·~1 min read·
/us/cfr/t33/s§ 183.560·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
Each hose clamp on a hose from the fuel tank to the fuel inlet connection on the engine, a hose between the fuel pump and the carburetor, or a vent line must:
(a)Be used with hose designed for clamps;
(b)\[Reserved\]
(c)Be beyond the bead, flare, or over the serrations of the mating spud, pipe, or hose fitting; and
(d)Not depend solely on the spring tension of the clamp for compressive force. \[CGD 74-209, 42 FR 5950, Jan. 31, 1977, as amended by CGD 81-092, 48 FR 55737, Dec. 15, 1983\]